■
Basic Information
Model NO.:B1
Type:Forced Exhaust
Energy Efficiency:Grade One
Interior Material:Copper
Installation:Indoor Standard, Packaged Boiler
Fuel:Gas-Fired
Certification:ISO9001, CCC
Expansion Tank:8L
Power Supply:220V~50Hz AC
Production Capacity:5000 Units
■
Product Introduction
The Gas Heating Hot Water Stove showcases a sophisticated, contemporary design that merges elegance with practicality. Its main body features a large, frosted glass panel in a soft, muted beige tone, which adds a high-end, minimalist aesthetic while resisting fingerprints and scratches. The lower section integrates a sleek, integrated digital control area with a bright LED display showing current and set temperatures, and a circular analog clock for an intuitive interface.
Dual Functionality
As a dual-purpose appliance, it delivers versatile central heating and domestic hot water. It supports radiators (30–80°C) and underfloor setups (30–60°C). The gas proportional valve eliminates sudden temperature fluctuations for comfortable showers.
Key Advantages
Boasts high thermal efficiency via a DC variable-frequency fan. The sealed oxygen-free copper heat exchanger enhances transfer efficiency while resisting corrosion, significantly extending the appliance's lifespan.
?
Frequently Asked Questions
1. How to choose the power of the wall-mounted boiler to match my home layout?
For ordinary residential buildings of 80-150m², choose 24KW. For larger units or villas over 150m², 28KW or above is recommended. In poorly insulated areas, increase power by 20-30% for consistent hot water.
2. Can a dual-purpose boiler provide both heating and hot water at the same time?
The functions alternate; the hot water takes priority. The system automatically switches based on faucet usage, temporarily suspending heating while hot water is active.
3. Is there a big difference between first-class energy efficiency and ordinary boilers?
Yes, first-class efficiency condensing boilers can reach over 107% thermal efficiency, saving 15-20% on gas costs compared to non-condensing models.
4. Can I install this in an old house without pre-installed heating pipes?
Yes, you can choose an open-air radiator system. It does not require damaging walls or existing decoration and has a short construction period.
5. How to prevent freezing when away from home in winter?
For short absences, use the anti-freezing mode with power and gas left on. For long absences, drain all water from the machine and pipes to prevent damage.
6. Does the wall-mounted boiler consume a lot of electricity?
No, the main components (fan and pump) use only 100-200W and do not run continuously. The monthly consumption is comparable to a household refrigerator.
Coden Kitchen
